This paper deals with the opportunities for the technique of condensation, for Wood fired household heaters, on the Swedish market. In this project the condenser is preceded by a scrubber and both energy exchange and separation of unburnt particles have been studied. The facility studied is connected to a wood stove at 30 kW. The tests would show that the effect from the stove never reached above 16 kW. This might be a result of the low temperature of the water going into the stove, from the condenser. In addition to this the wood was not of highest quality and the stove could have needed some maintenance before the tests.

Finnhamn is a small group of islands in the Stockholm archipelago. At Stora Jolpan, the biggest island, there is a hostel. The main building was built in 1915 and is called Utsikten. The purpose of this project is to on behalf of the Archipelago Foundation (Skärgårdsstiftelsen) find alternative systems that can replace the existing heating system of Utsikten (an oil-fired boiler and electricity heaters) to a system with renewable energy. The alternative system that this project focuses on is a system of solar collectors combined with a wood chip boiler.

The municipality of Enköping is presently working out a new layout plan for the town of Enköping and new residences are planned in the harbour area. Because of these plans, the municipal energy company ENA Energi may have to move its location from the harbour to another part of the city.The aim of this degree project is to investigate the possibility of building a new CHP plant in another area of Enköping. The future demand on district heating and infrastructure at the new location have been projected. A new CHP plant has been dimensioned and economic analyses concerning the project have been made.Results show that the future demand of district heating in Enköping will differ a little from the present needs. In 2030, the district heating production is expected to be c.

This report is a bachelor's thesis of two students from the Energy and Environment degree at KTH Stockholm. Grinda is an island situated Stockholm archipelago. Skärgårdsstiftelsen is landowners and manages the area. Grinda Wärdshus, a guest house located in the island, currently uses an oil-fired boiler as a heating system. The aim of this thesis is to investigate whether wood chips or pellets is, from a sustainability standpoint, a suitable heating method for the guest house.

I want to look at the possibilities to start selling hot water from a small district heating plant with bioenergy. My reason for doing this project is to look at a new business opportunity for our farm. Our company have less work during the winter time compared to the spring and this project will give us more work during the winter. I also want to take as much material as possible for heating from our farm in order to increase the value of the products from the farm. The project is in a village near us, where we should support a school, a churh, a home for the aged, a kindergarten and a parish hall with heat. In my work I have compared two different alternatives with each other. The first alternative is to put a central heater in one of the buildings, the home for the aged, in which we will burn oat.

The purpose of this study is to explain how the value of sawn wood changes when sawn wood are cut in 30 respective 60 cm lengths. The raw material into the saw mill will mainly be bucked in 30cm and 60 cm modules. There will also be two alternatives where the timber will be bucked special lengths, 370, 490 and 550 cm but also in 490 and 550 cm.The method used for the study is to simulate both cutting and sawing the woods. For cutting the simulator Timan is used and for sawing the simulator Timberopt is used. When data is generatedfrom the simulators, calculations of some key figures is done and also how much the revenue need to be increased for the sawn wood in order to cover for the increased costs of changing sawn woodfrom 30 cm to 60 cm modulesThe conclusion is that the single biggest reason, impacting the value of the sawn wood is the cutting at the saw mill.When going from 30 to 60 cm modules, the impact will be that the customers to the saw mill must pay more to increase the revenue by at least 10% for the sawn wood in order to justifice the changein production.It is also possible to increase the value of the products further by bucking the timber in three lengths, 370, 490 and 550 cm, in order to get 12 % increase of the share of longer sawn wood (>= 480 cm)..

Fire is an important ecological factor, but its consumption of coarse woody debris, CWD, has hardly received any attention. In this study, I investigate the consumption in relation to the time of initial flame exposure and propensity for continued combustion of standing CWD of pine (Pinus sylvestris). Two types of CWD were studied. Firstly, wood that had been dead for one to ten years. Secondly, wood that had been dead for several decades. In the burning experiments, logs of approx.

To achieve the Government's milestones for 2018, which means that 50 % of food waste shall be separated from household waste and undergo biological treatment (composting or anaerobic digestion).   Hultsfred, Högsby and Vimmerby are three adjacent municipalities of Kalmar, county Småland. During 2012 and 2013 analyzes were performed on their household waste to determine its composition. The household waste is currently collected in one fraction. The work, examines how much food waste the household waste contains. From the amount of food waste, the biogas potential is examined - how much food waste biogas generates and how much energy it corresponds to.   Food waste is broken down by microorganisms under anaerobic conditions (anaerobic digestion) in a biogas plant.

Since prehistoric time man has used wood to build their environment. The material?s availabilitycombined with its good mechanical properties has often made it the material of choice. Like allmaterials exposed to natures degradative processes the properties of wood decreases over time.Rot, UV radiation and attacks by insects and pests damage wood if not protected. Since we wantwhat we build to consist, optimizing our building materials durability is of great interest.Techniques and methods for increasing the endurance of wood have been developed in severaldifferent places and for a long time.

Public concern about the release of toxic compounds from wood-based products drives legislation towards enforcing industries to find and use more sustainable solutions for wood treatment. Plant oils are good alternatives to treat wood, minimizing or even neutralizing the impact on the environment. Wood modification with epoxidised linseed oil (ELO) and acetic acid as catalyst has proven a suitable method to impregnate and protect wood. However, the mixture presents a serious inconvenience because of the quick polymerization of the ingredients that limits its practical application. Therefore, this study was designed to evaluate an alternative method using a two-step process which bypassed the problem above.

This document presents calculations of adjusted GDP based on satellite household accounts for the year 2001 with the purpose to compare adjusted and official GDP for Sweden, Germany, Estonia and Finland. Household production in each country is estimated using time use survey data from Eurostat and a monetary value is estimated using average wage (after taxes) for each country. The results indicate that the value of household production using this methodology increases GDP with between 42% (Finland) and 55% (Germany) compared to official GDP statistics. A comparison of GDP/capita between the countries included in the study shows that the GDP/capita in Germany increases more that the other countries due to the relatively high proportion of time used for household production (mainly German women) combined with a high average wage. In fact, the results show that Germany has higher adjusted GDP/capita than both Finland and Sweden (but Germany has lower GDP per capita when official statistics is used for the comparison).

This essay concerns the visual trade grading of pine and spruce.In the 1800s developed rules for sorting of wood. The rules used to facilitate the export trade.The terms of the regulatory sorting systems developed in the 1900s. While it still used some of the older terms.The essay deals with how the grading rules affect the use of wood and how the rule work and how the terminology works.Some of the terms used for sorting are O/S, Kvinta, Utskott and A,B,C,D.You sorting by counting the numbers of knots, cracks and other characteristics of each piece of wood.The sawmills have much influence in how the rules developed.Today it is often already determined in the sawmills which uses each piece of wood most have..

Forest management plans have been sold to private forest owners by wood supplying companies for a long time. These plans are considered to be effi-cient tools to identify measures and wood volumes, and are simply a starting point for discussions between private forest owners and round wood pur-chasers. However, large variations are observed between different purchas-ers, in their usage of the plans. The purpose of this report is to identify to what extent a forest management plan can promote an increase in the amount of wood which a round wood purchaser can obtain and to find differences in the way of using the plans between different wood purchasers. Furthermore, the purpose is also to ana-lyse if varying owner structures can be underlie variations in the selling of forest management plans. Qualitative interviews with nine of Stora Enso?s round wood purchasers were performed.

Marlot Company Limited is a company in the sector household services. It is a new company where the owners, and also the clients, felt that the company was in need of a distinct platform where they could communicate with their current and prospective customers. The assignment was to create a platform consisting of a graphic profile and a Wordpress site for the company. The graphic profile's task was to distinctly profile the company in the market, and visualizing the conceptions that the company wants to be associated with. The purpose of the Wordpress site was to create a showcase for Marlot towards their customers, and thecompany itself could manage after completion.These two products have been created with the help of a pilot study which included an analysis in which the competitors in the market has been scanned, and reports of the household services sector has been studied.

Stump wood is a hot alternative when the heating plants demands more and more forest fuel. The aim with the study has bean to calculate the costs in four different systems for transportations of stump wood, examine if there are any differences in fuel quality for the stump wood in the different systems, analyse if the fuel quality in stump wood is affected with the time it lays by the road side and how much space the stump wood demands on the road side. To calculate the costs for the different systems a system analysis was carried out, where some of the costs were collected through field studies on Holmen Skog stump experiment and other costs were collected from literature and contacts. Data for the fuel quality study was collected from Eons heat plant in Norrköping. Data for the study of how much space stump wood takes along a roadside was collected from field studies.